Heat Loss Estimator
Estimate your building's heat loss in BTU/hr to help size heating systems. Adjust the inputs below to see a breakdown by component.
Set to 0 for slab-on-grade
R-2 = double pane, R-3 = triple pane
Tight = 0.2, average = 0.35, leaky = 0.5+
Heat Loss Summary
Total Heat Loss
—
Recommended Heating Capacity
—
Equivalent (kW)
—
Equivalent (tons)
—
Product recommendations coming soon — check back for direct links to compatible parts.
How this works
Q = A / R × ΔT is the basic heat loss formula, where Q is heat loss in BTU/hr, A is area in square feet, R is the thermal resistance (R-value), and ΔT is the temperature difference between indoors and outdoors.
This calculator applies that formula to each building component (walls, ceiling, floor, windows, doors) and adds infiltration losses from air leakage. The result is a simplified estimate — not a full Manual J load calculation.
It does not account for solar gain, internal heat sources, ground coupling for slabs, or varying insulation quality. For accurate HVAC sizing, consult a professional.
The 10% safety margin on the recommended capacity accounts for estimation error and ensures the heating system can handle worst-case conditions.
Links on this page may be affiliate links. We earn a small commission at no extra cost to you.
Need Help Sizing Your Heating System?
Book a consultation to get a personalized plan for your home.
Schedule a Consultation