DavidPoz

Wire Sizing Calculator

Find the right wire gauge for your DC or AC circuit. Accounts for both voltage drop and ampacity safety ratings.

Wire Sizing Results

Required Circular Mils

—

Min AWG (voltage drop)

—

Min AWG (ampacity)

—

Recommended Wire Size

—

Actual Voltage Drop

—

Total Wire Length Needed

—

Product recommendations coming soon — check back for direct links to compatible parts.

How this works

Wire sizing needs to satisfy two independent requirements: voltage drop and ampacity (safe current carrying capacity). The calculator picks the larger wire gauge of the two.

Voltage drop uses the formula: Circular Mils = (2 × resistivity × distance × current) ÷ allowable voltage drop. The “2” accounts for the round trip — current flows out and back. A 3% drop is the standard NEC recommendation for branch circuits.

Ampacity is the maximum current a wire can carry safely without overheating. Even if voltage drop allows a smaller wire, you must use a gauge rated for the actual current.

Copper vs. Aluminum: Copper has lower resistivity (better conductivity) but costs more. Aluminum is lighter and cheaper but requires larger gauges for the same current. Aluminum also needs special connectors rated for aluminum wire.

Always verify with local codes and consult a licensed electrician for installations above 30A or in permanently wired applications.

Links on this page may be affiliate links. We earn a small commission at no extra cost to you.

Need Help With Your Wiring?

Book a consultation to get a personalized plan for your home.

Schedule a Consultation